Alignment
Bar - Easy Panel.cfg modification so you can "Nail" your
Approaches and
Landings with Ease. This is an easy modification that
anyone can make to their Flight
Simulator 2002 and 2004 Program. It allows a BLUE Bar
to be placed on your screen;
all you have to do is to "Line-Up" your aircraft (on
Approach) with the Runway. Keeping
the Blue Alignment Bar lines-up with the Centerline,
it's a sure thing that your Landing
will be "Picture Perfect" EVERY
TIME.
How to Build Your Own Push/Pull Throttle
Quadrant (Added 09/28/2008) - Articles to build Lever Type
Throttle Quadrant are
all
over the internet but a Push/Pull Throttle for
your Cessna or compatible aircraft is not to be found;
Until NOW!
Using readily available
parts from Desktop Aviator, and this article, you can
construct your very own Throttle
Quadrant.
Toggle
Switches Part
#1 - Easy Approach to adding Push Button &
Toggle Switches to your FS with a device called USB to 10 Button
Interface.
Add
Toggle & Rocker Switches to the USB to 10 Button
INTERFACE Part #2 (Added 02/14/2006) - A number of
customers asked
me for additional information on adding Push Button, Rocker
and Mini-Toggle Switches to the 10 Button INTERFACE (Model
#805). Well
here it is. A lite-hearted approach to the design and implimentation and
interfacing your aircraft panel to readily available automotive
switches.
Rotary Encoder
Switches - Learn the Inner Workings of these Flight Simulator
Work Horses. Learn how you might be able to incorporate
Rotary
Encoders in the Radio Shack of your 747.
Make an Ignition
Switch - A
download from SimKits on how to make a Cessna Starter Switch with
spring-return. Just like the REAL Thing.
My FS9 Autopilot by:
Don "dowop" Loy -
(Added 03/01/2006) A short article I wrote on how I used the Desktop
Aviator's USB to
10
Button
INTERFACE to wire-up a home-made Autopilot for
my flight simulator.
My 737 Project by David Laquerre - (Added 11/27/2006) I'm building a full size 737
cockpit. Looks really GREAT! Come take a look.
Adding an Elevator Trim Wheel to Your CH
Products Flight Yoke by Steve Sokolowski - (Added 12/03/2006) A Very easy
modification to your
CH Product's Yoke so you can add even MORE Realism to your flight
with the addition of a 7 inch Elevator Trim
Wheel.
Building My Own Trim
Wheel by
Raymond Masser - (Added
03/09/2007) I read the article by Steve Sokolowski and I thought I
can
do that". So I did. I made my own Elevator Trim Wheel. Click
the LINK to see how I did it.
| 
